Ishima Rave M1.0R PRO 1/8th RTR Radio Controlled Nitro Racing Buggy

----------------------

---------------------------

GO FASTER!
1/8th scale competition 4WD Pro racing buggy
------------------------
The ISHIMA RAVE M1.0R is the top of the line model in the Rave series. Designed by top designer Claude Lachat from France, the RAVE M1.0R will raise the performance bar for 1/8th off-road buggies.
------------------------
Strength, durability, nimble handling, stability and maximum corner speeds were the key design features targeted. The signature “Lay-Down” shock design provides excellent handling, smooth out all asperitys in the track and jumps can be taken effortless. Even if you push the car to it’s limits, it stays perfectly balanced. The RAVE M1.0R will be the buggy to choose to dominate the competition.
 

------------------------

---------------------------

.

Easy to acces center differential assembly. only remove 4 screws and the complete differential assembly can be removed for cleaning or servicing. ------------------------ All gears in the RAVE M1.0R are made of hardened steel, CNC-machined to absolute perfection. ------------------------ The center differential is fitted with 6 spider gears, the differential casing is made of temperature resistant composite material. The differential outdrives are made of hardened steel. ------------------------ The working of the differential can be adjusted by using silicon oil inside the differential ranging from 5000 CPS (soft) up to 100.000 (hard). ------------------------ The center differential assembly is fitted with a separate front & rear brake system. The ventilated steel brake disks in combination with the steel / Ferodo brake pads ensure optimal deceleration. Special brake discs alignment supports ensure a perfect guidance of the brake disks. The brake cams are ball raced for more precise control of the braking power. ------------------------

When you talk “racing”, you talk “gears”. Spinning at more then 8000 RPM, ever changing speeds and increasing temperatures inside the differentials up to 80°C, the gears are a critical part in a racing buggy. ------------------------ All gears in the RAVE M1.0R are made of hardened steel, CNC-machined to absolute perfection. The differential is fitted with 6 spider gears, the differentail casing is made of temperature resistant composite material. The differential outdrives are made of hardened steel. ------------------------ The working of the differential can be adjusted by using silicon oil inside the differential ranging from 5000 CPS (soft) up to 100.000 (hard). ------------------------

Specifications: ----------------- RAVE M1.0R Competition 1/8th scale Nitro powered buggy RTR --------------- Height: 160mm Weight: 3380g Length: 485mm Width: 305mm

-----------------

Features:

------------------

--------------------- The ISHIMA RAVE M1.0S RTR is factory fitted with a .25 size engine with a userfriendly pull start system.The M.25 size ISHIMA engine is easy to start, easy to tune and provides plenty of power and torque. --------------

---------------